Kangte Glucose Assay Kit - Hexokinase Method

Glucose is the ubiquitous fuel molecule in biology. It is oxidized to water, carbon dioxide and the universal energy molecule ATP. The level of glucose in a human blood sample is a key diagnostic parameter for metabolic disorders. Increased glucose levels are associated with diabetes mellitus, hyperactive thyroid and pituitary glands, and hypopituitarism. Moreover, a decreased blood glucose level is associated with myxedema and hypopituary syndrome. Glucose assay kits are used in drug discovery as they do not require pretreatment and can detect the glucose level in samples at any trough.

Glucose assay kit is a 96-well microtiter plate-based test for measuring the total glucose in biological samples and foods. It contains sufficient reagents to perform 500 assays. The glucose concentration in sample is determined by comparison with a known glucose standard. This method works best when the glucose concentration is less than 1.56 mM. Alternatively, a kit containing beta-D-glucose or D-glucose Oxidase is used.

View detail at https://www.zjkangte.com/product/carbohydrate-metabolism/glu-glucose-assay-kit-hexokinase-method.html

The glucose assay kit requires the use of Jurket and HepG2 cells. The glucose concentration in the cell lysates must be less than 5 mM. UltraPure water is recommended for optimum results, though it is not required for all assays. The resulting titer is usually within the linear range of the standard curve. Unlike the original, the glucose assay kit comes in trial sizes.
 

The maximum concentration detected by this kit is 10 mM. The highest limit of detection of this glucose assay kit is calculated by multiplying the highest Standard with the lowest volume. A trial size of this glucose assay kit is also available, for those who do not want to use a full sample. The shelf life of the kits is 6 months. It is advised to order the test tubes in large quantities and run them through the protocol several times.

The glucose assay kit requires 1 x 10 5 Jurket and 2 x 10 6 HepG2 cells. Depending on the chemistry of your samples, you can use the K606 or K686 glucose assay kit for the analysis. It is important to note, however, that there are differences between the two. For example, the glucose assay K606 is a better choice for a sample containing a large amount of sucrose.

For most glucose assay kits, a sample must be prepared for the tests. The cells should be frozen in -80C for a maximum of 20 minutes. To avoid a high sugar level, use a buffer with less than 10% sugar. For most samples, a pH of 6.0 is suitable. If you are testing the sample in the laboratory, a low sugar concentration is acceptable. In some cases, the kit may also have an appropriate sensitivity for diabetics.

For high-quality samples, the glucose assay kit requires a high concentration of sucrose. Therefore, you must make sure that the sample is of low sucrose concentration. The kit must be used for diabetics. This may affect the quality of the results. The sensitivity of the test depends on the amount of sugar present in the sample. The sensitivity of the test. Nevertheless, the glucose assay kit is a reliable tool for detecting blood sugar levels in a variety of samples.

Glucose assay kit is available for diabetics who want to detect the presence of glucose in a blood sample. The quality of the glucose assay depends on the samples. The samples should be of low sucrose concentration. Hence, a high-sugar sample is not recommended. There are different types of kits for high-sucrose assay. The K606 assay kits are meant for diabetics and the K688 ones.

It is important to note that the glucose assay kit is recommended for samples with a low-sucrose concentration, since it may affect the results of the test. It is not necessary to use the same sample each time. The higher glucose concentration will be better able to identify the differences in the sample, which will improve its reliability. A low-sucrose level can also affect the accuracy of the test.

The Glucose Assay Kit is designed for a variety of different samples. It is compatible with a number of different samples and does not require sample centrifugation or spin columns. It does not require neutralization solutions. Its 96-well format makes it easy to analyze a variety of sample types. The assay kit is based on the glucose levels in a blood sample.